Controller Tester
How to test your controller
- Connect it. Plug the controller in with a USB cable, or pair it over Bluetooth in your computer's or phone's settings.
- Press any button. Browsers only show a controller to a page after a button press, so nothing appears until you do.
- Check every button. Each one lights up yellow while you hold it, and the counter goes up by one per press. A button that lights up on its own, or counts two presses for one, is failing.
- Squeeze the triggers slowly. The bars should move smoothly from 0% to 100%. A bar that jumps or stops short of 100% points to a worn trigger.
- Roll each stick around the edge. The purple shape shows the range the stick reached. A round shape close to 100% means full range; a flat side means that direction falls short.
- Try the vibration. Chrome and Edge can make most controllers rumble from a web page; other browsers may not.
How to check for stick drift
Let go of both sticks and watch the number next to each one. That's the distance from the center, from 0 to 1.
- Below 0.05: fine. Every stick reads a little off-center at rest.
- 0.05 to 0.15: light drift. Many games hide it with a dead zone (the dashed circle), but you may notice slow aim or camera creep.
- Above 0.15: real drift. The character or camera will move on its own in most games.
Flick the stick and let it snap back a few times. If the dot returns to a different spot each time, the stick's sensor or spring is wearing out. Cleaning around the stick base sometimes helps; otherwise the stick module needs replacing, or the controller needs a warranty claim.
Controller not detected?
- Press a button after the page has loaded; the page can't see the controller before that.
- Try a different USB cable. Many cables only charge and carry no data.
- On Bluetooth, remove the controller from your device list and pair it again.
- Close other apps that may take over the controller, such as game launchers or remapping tools, then reload the page.
- Some controllers show as a non-standard layout. The page then lists raw buttons and axes instead of names, and the test still works.
Then play something
All GamesYap games run free in your browser on a phone, tablet or computer. Browse all games, find something to play with a friend in multiplayer browser games, or see which games run best on a school laptop in Chromebook games.
FAQ
How do I test my controller online?
Connect the controller by USB or Bluetooth, open this page and press any button. The tester then shows every button lighting up as you press it, both sticks with their exact position, the trigger pressure and a vibration test. Nothing is installed, and it works in Chrome, Edge, Firefox and Safari on computers and many phones.
How can I tell if my controller has stick drift?
Let go of the stick and read the number next to it, which is the distance from the center. Below 0.05 is normal. Between 0.05 and 0.15 is light drift that many games hide with a dead zone. Above 0.15 the stick will move your character or camera by itself in most games, which is real drift.
Does this work with a PS5 or Xbox controller?
Yes. DualSense, DualShock 4, Xbox and many third-party controllers show up once you connect them to a computer or phone and press a button. The buttons are named for both layouts, such as "A / Cross". If your controller reports a non-standard layout, the tester lists raw buttons and axes instead, and the test still works.
Why does the tester not detect my controller?
Browsers only show a controller after you press a button with the page open, so press one first. If nothing happens, try another USB cable, since many cables only charge, or remove the controller from your Bluetooth devices and pair it again. Closing launchers or remapping apps that take over the controller also helps.
Why does the vibration test not work?
Making a controller rumble from a web page is supported in Chrome and Edge, but not in every browser or for every controller. If the test says vibration is not allowed, try Chrome or Edge with the controller connected by cable. If the browser accepts the request and you feel nothing, the rumble motors may be worn out.